Solubility improvement and Dissolution enhancement of Simvastatin using Fluidized Hot-Melt Granulation Technique

Authors

  • Deval J. Modi Department of Pharmaceutical Sciences, K. B. Institute of Pharmaceutical Education and Research, Kadi Sarva Vishwavidyalaya, Sector – 23, GH – 6, Gandhinagar – 382023, Gujarat, India
  • Divyesh H. Shastri Department of Pharmaceutical Sciences, K. B. Institute of Pharmaceutical Education and Research, Kadi Sarva Vishwavidyalaya, Sector – 23, GH – 6, Gandhinagar – 382023, Gujarat, India
  • Pragna K. Shelat Department of Pharmaceutical Sciences, K. B. Institute of Pharmaceutical Education and Research, Kadi Sarva Vishwavidyalaya, Sector – 23, GH – 6, Gandhinagar – 382023, Gujarat, India

Abstract

A fluidized hot melt granulation (FHMG) technique was used to enhance the solubility and dissolution of simvastatin. Employing meltable hydrophilic binders and then converting the melt dispersion into flowable and compressible dispersion granules to yield a rapidly dissolving tablet formulation. Granules prepared by using hydrophilic polymer polyethylene glycol 4000 or 6000, Gelucire 50/13 or 44/14, and Poloxamer 188 or 407, spray-dried lactose as a fluidized substrate. The binder used for spray granulation in this technique was a mixture of molten Gelucire 50/13 and simvastatin. Phase Solubility studies showed an increase in solubility ratio of 1:4 for Simvastatin: Gelucire 50/13. The prepared granules were characterized using FTIR, and DSC spectra exhibited drug excipients compatibility. XRD data exhibited a partial loss of crystallinity as indicated by significantly less intensity of simvastatin peak in a sample than pure simvastatin. Tablets with the faster dissolution of simvastatin (98.99% of the drug release with 30 minutes). This was achieved with lactose/MCC as filler. A significant enhancement in-vitro dissolution profile of the melted granules was observed compared to the pure drug and marketed product. Therefore, the results confirmed the high potential of the FHMG technique to produce granules with enhanced drug solubility and release rate.

Keywords:

Fluidized Hot Melt Granulation (FHMG), Fluidized bed granulation, Meltable Binder, Top Spray, Simvastatin

DOI

https://doi.org/10.25004/IJPSDR.2021.130208

References

Sruti J, Swain S. Improvement in the dissolution rate and tableting properties of cefuroxime Axetil by melt-granulated dispersion and surface adsorption. Acta Pharma Sinica B. 2013; 3(2):113-122.

Kalra K. Enhancement of solubilit y and dissolution rate of rifapentine by melt granulation technique. Int. J Pharm Life Sci. 2012;3(3):1503-1506.

Shimpi S. Preparation and evaluation of diltiazem hydrochloride- Gelucire 43/01 floating granules prepared by melt granulation. AAPS Pharm SciTech. 2004;5(3):1-6.

Tayel SA. Formulation of ketotifen fumarate fast-melt granulation sublingual tablet. AAPS Pharm SciTech. 2010;11(2):679-685.

K raciuk R . Ef fec t of dif ferent excipient s on t he physical characteristics of granules and tablets with carbamazepine prepared with polyethylene glycol 6000 by fluidized hot-melt granulation (FHMG). AAPS Pharm SciTech. 2011;12(4):1241- 1247.

Mukharya A. Development and scale-up of SD-FBP formulation technolog y in line with parametric QbD. Res J Pharm Sci. 2012;1(1):1-21.

Patel K. Enhancement of dissolution rate of domperidone using melt granulation technique. Scholar Res Lib. 2011;3(2): 25-33.

Tandel H. Formulation development and in-vitro/ex-vivo assessment of mucoadhesive microemulsion for nasal delivery of centrally acting drug modafinil. Ind. Journal Novel Drug Delivery. 2016;8(2): 72-92.

Mothilal M., Harish Kumar A, Chaitanya Krishna M, Manasa V. Formulation and evaluation of modafinil fast dissolving tablets by sublimation technique. J Chem Pharm Sci. 2013;6(3):147-154.

Avachat SS. Parpani. formulation and development of bicontinuous nanostructured liquid crystalline particles of efavirenz. Colloids surf Bio interfaces. 2015;126:87-97.

Gaur PK. Enhanced oral bioavailability of efavirenz by solid lipid nanoparticles: in-vitro drug release and pharmacokinetics studies. Biomed Res Int. 2014;2014:363-404.

Kotta, S. Anti-HIV nano emulsion formulation: optimization and in-vitro-in-vivo evaluation. Int. J Pharm. 2014;462(1-2):129-134.

Patel GV. Nanosuspension of efav irenz for improved oral bioavailability: formulation optimization in-vitro in situ and in-vivo evaluation. Drug Dev Ind. Pharm. 2014;40(1):80-91.

Singh. Development and characterization of taste masked efavirenz pellets utilizing hot melt extrusion. J Drug Del Sci Tech. 2013;23(2):157-163.

T. Koh, PT JNC. Formulation development and dissolution rate enhancement of efavirenz by solid dispersion systems. Indian J Pharm Sci. 2013;75(3):291-301.

Modi DJ, Shelat PK, Shastri DH. Fluidized Hot Melt Granulation Technique: An Approach to Improve Micromeritics Properties and Dissolution Rate of Efavirenz. International Journal of Pharmaceutical Sciences and Drug Research. 2020;12(5): 554-560.

Modi DJ, Shelat PK, Shastri DH. To explore potential of Fluidized Hot Melt Granulation Technique to Improve Micromeritics Properties and Dissolution Rate of Modafinil. Journal of emerging technologies and innovative research. 2019;6(5):1799-1807.

Published

30-03-2021
Statistics
Abstract Display: 598
PDF Downloads: 469
Dimension Badge

How to Cite

“Solubility Improvement and Dissolution Enhancement of Simvastatin Using Fluidized Hot-Melt Granulation Technique”. International Journal of Pharmaceutical Sciences and Drug Research, vol. 13, no. 2, Mar. 2021, pp. 164-71, https://doi.org/10.25004/IJPSDR.2021.130208.

Issue

Section

Research Article

How to Cite

“Solubility Improvement and Dissolution Enhancement of Simvastatin Using Fluidized Hot-Melt Granulation Technique”. International Journal of Pharmaceutical Sciences and Drug Research, vol. 13, no. 2, Mar. 2021, pp. 164-71, https://doi.org/10.25004/IJPSDR.2021.130208.