DESIGN AND EVALUATION OF MICROSPHERES LOADED WITH PIRENZEPINE
Abstract
The current objective of the investigation was to fabricate Pirenzepine loaded microspheres for the treatment of gastritis delivered through oral route. The microspheres were prepared by ionotropic gelation technique using sodium as alginate polymer and calcium chloride as cross-linking agent. The effect of polymer and cross-linking agent on particle size, shape, % yield, entrapment efficiency, and drug release were studied. The prepared microspheres morphology and physicochemical properties of were investigated by Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Among the total S14 formulations, S7 formulation was optimized at 2.2% of sodium alginate, 7% of calcium chloride maintained100rpm for 10 min at room temperature. The optimized S7 formulation displayed the %EE 94.10%, particle size 82.45 ± 0.09µm, % yield 96.30% and swelling index of 95.13%. From In vitro drug release studies S7 shown 97.17 ± 0.28% up to 12 h in 0.1N HCl, and the drug release followed the zero order and Korsmeyer-Peppas model (R2 = 0.987, 0.995) respectively, indicating the possible drug release mechanism to be by erosion and diffusion. The marketed product showed the drug release of 95.23 ± 0.21% within 1 h. The optimized S7 formulation subjected to stability studies for 6months as per ICH guidelines, no appreciable difference was observed hence the S7 formulation found stable. The data obtained thus suggest that a micro particulate system can be successfully designed for sustained delivery of Pirenzepine and to improve its bioavailability.
Keywords:
Microspheres, Pirenzepine, Release kinetics, Gastritis, SEMDOI
https://doi.org/10.25004/IJPSDR.2018.100204References
2. Jiao Y, Pang X, Liu M, Zhang B, Li L, Zhai G. Recent progresses in bioadhesive microspheres via transmucosal administration. Colloids Surf B Bio interfaces. 2016; 140:361-72.
3. Hemlata P, Roshan VT, Michael AR. Recent Advancements in Mucoadhesive Floating Drug Delivery Systems: A Mini-Review. J Drug Deliv Sci Tec. 2016; 31: 65-71.
4. Junzi Wu, Gareth RW, Christopher BW. Liraglutide-loaded poly (lactic-co-glycolic acid) microspheres: Preparation and in vivo evaluation. Eur J Pharm Sci. 2016; 92: 28–38.
5. Wenfang G, Simon T, Martina HS. Synthesis of pH-responsive and thiol-degradable hollow microspheres. Polymer. 2013; 54: 1010 – 1017.
6. Bhardwaj P, Singh R, Swarup A. Development and characterization of newer floating film bearing 5-fluorouracil as a model drug. J Drug Del Sci Tech. 2014;24: 486-490.
7. Vergin H, Mascher H, Strobel K, Nitsche V. Pharmacokinetics and bioequivalence of different formulations of pirenzepine. Arzneimittelforschung. 1986; 36(9):1409-12.
8. SaisivamS, Rahamath UM, Shakeel F. Development of floating matrix tablets of losartan potassium: in vitro and in vivo evaluation. J Drug Del Sci Tech. 2013; 23: 611-617.
9. Harri H, Peter D, Pitkänen P, Markku H. Effect of concentration and temperature on the properties of the microspheres prepared using an emulsion–solvent extraction process. Adv Powder Technol. 2012; 23: 779–786.
10. Megha S, Seema K, Agnimitra D. In-vitro and in-vivo evaluation of repaglinide loaded floating microspheres prepared from different viscosity grades of HPMC polymer. Saudi Pharma J. 2015; 23: 675–682.
11. Rishikesh G, Sunil Kumar P, Snigdha P, Bhardwaj P. Formulation and evaluation of novel stomach specific floating microspheres bearing famotidine for treatment of gastric ulcer and their radiographic study. Asian Pac J Trop Biomed.2014; 4: 729-735.
12. Yasunori S, Yoshiaki K, Hirofumi T, Hiromitsu Y. In vitro evaluation of floating and drug releasing behaviors of hollow microspheres (microballoons) prepared by the emulsion solvent diffusion method. Eur J Pharm Biopharm.2004; 57: 235–243.
13. Pandya N, Pandya M, Bhaskar VH. Preparation and in vitroCharacterization of Porous Carrier–Based Glipizide Floating Microspheres for Gastric Delivery. J Young Pharm.2011; 3: 97–104.
14. Kampanart H, Katsuhide T, Sriamornsak P, Nunthanid J. Advanced technologies for assessment of polymer swelling and erosion behaviors in pharmaceutical aspect. Eur J Pharm Biopharm 2013; 83: 315–321.
15. Saravanan M, Anupama B. Development and evaluation of Ethylcellulose floating microspheres loaded with ranitidine hydrochloride by novel solvent evaporation-matrix erosion method. Carbohydr Polym. 2011; 85: 592–598.
16. Ninan M, Lu X, Qifang W, Xiangrong Z. Development and evaluation of new sustained-release floating microspheres. Int J Pharm. 2008; 358: 82–90.
17. Antonio JR, Ronald JN, Philippe A. Microencapsulation of lipophilic drugs in chitosan-coated alginate microspheres. Int J Pharm. 1999; 187: 115–123.
18. Pushp RN, Myung-Kwan C, Hoo-Kyun C. Preparation of floating microspheres for fish farming. Int J Pharm. 2007; 341: 85–90.
19. Sunil K. Jain, Govind.P, Agrawal, Narendra K. Jain. A novel calcium silicate-based microsphere of repaglinide: In vivo investigations. Journal of Controlled Release. 2006; 113: 111–116.
20. Yan Li, Haibing He, Qiao Wang, Xing Tang. Preparation, stability and pharmacokinetics evaluation of lipid microspheres loading a promising antitumor candidate, Timataxel. Asian J Pharm Sci. 2016; 11: 771–779.
Published


How to Cite
Issue
Section
Copyright (c) 2018 A. Aparna, C.M. Shalina, D.V.R.N. Bhikshapathi

This work is licensed under a Creative Commons Attribution 4.0 International License.